Features
Controller |
- 진보된 디지털 퍼지 제어 콘트롤러는 사용이 편리하고 온도를 정밀하게 제어 - 다기능 정전방식 터치버튼은 터치감이 뛰어나고 라텍스 장갑을 착용하고 작동 가능 - 조그 다이얼로 온도, 시간을 간편하게 설정하고 사용이 간편함 - 고해상도 LCD 디스플레이는 설정값, 현재 온도, 시간 등 작동 상태를 효과적으로 표시
|
Construction |
- 투명 폴리카보네이트 뚜껑 - 내구성이 뛰어난 몰드 히터 - 본체는 엔지니어링 내열 플라스틱 재질로 제작되어 내화학성이 뛰어남 - 고급 PPS 단열재
|
Performance |
- 온도 제어 범위 상온+5℃ ~ 150℃, 표시해상도 0.1℃, 제어정밀도 ±0.1℃ at 37℃ - 센서가 내장되어 있어 정밀하게 온도를 감지 제어 - 타이머 설정 범위 1분 ~ 99시간 59분
|
Convenience |
- 교체가능한 알미늄 블록 - 0.2 ml PCR 튜브부터 18 mm 시험관 까지 다양한 규격의 알미늄 블록 제공
|
Safety |
- 과열방지장치 - 누전차단장치
|
Specifications
Heating | Heat transduction through aluminum block |
Temp. Range | ambient + 10°C ~ 150°C |
Accuracy | ± 0.1°C at 37.0°C ± 0.2°C at 90.0°C
± 0.4°C at 135.0°C |
Control | Advanced MCU processor with Timer |
Sensor | Class A Pt-100 Ω Sensor |
Safety | Over-Temperature Cut-Off |
| Over Current Cut-Off |
Material | Body - ABS Plastic |
| Bath – Heat Resistant PPS Plastic |
| Block – Anodized Aluminum |
Electric | 220±10% VAC 50/60Hz 1-Phase |
Plug config. | CEE 7/7 Schuko |
Models
Art. No. | |
Temperature Control |
|
Temp. Range | Ambient +5°C to +150°C |
Temp. Accuracy | ±0.1°C at 37°C |
| ±0.2°C at 90°C |
| ±0.4°C at 135°C |
Resolution | 0.1°C Display, 0.1°C Control |
Heat up speed | Approx 5°C /min |
|
|
Dimensions |
|
Block (W x D x H) | 120 x 92 x 40 / 50 mm |
Outer (W x D x H) | 170 x 250 x 145 mm |
|
|
Controller |
|
Type | Digital Fuzzy Control with Capacitive Touch Button and Jog Dial |
Timer | 99hr 59min by 1 min division |
Display | Full Size Digital Back Light LCD Display |
| Independent ON/OFF Switch |
|
|
Heater |
|
Type | Molded heater |
Heater Output | 300 Watt |
|
|
Safety Data |
|
Safety Device | Over Temperature Protection |
| Over Load Protection |
| Over Current Protection |
|
|
Material Data |
|
Body | ABS |
Block Bath | PPS |
Lid | Polycarbonate |
Block | Anodized Aluminum |
|
|
Electrical Data |
|
Rated voltage [V] | 230 ± 10% VAC |
Power frequency [Hz] | 50/60Hz |
Nominal power [W] | 300 |
Unit fuse [A] | 0 |
Phase (Nominal voltage) | 1~ |
Plug configuration | CEE 7/7 Schuko or BS 1363 |
|
|
Usable Condition |
|
Temp. & Humidity | 5oC - 40 oC, < 80% RH |
|
|
Packaging Data |
|
Shipping Dims. (W x D x H mm ) | 320 x 230 x 260 |
Type of packaging | Carton |
Net Weight (kg) | 1.6 |
Shipping Weight (kg) | 2.1 |
Ordering Information
Art. No. | Descriptions | Voltage |
JSDB-01T-PK | Dry Bath Heating Block SET | 230 VAC 1~ ph 50/60Hz |
including | PHB-20 Microtube Block 1.5/2.0ml, , Ø11 x 48 hole (H36mm) |
|
|
|
|
JSDB-01T | Dry Bath Heating Block MAIN BODY ONLY | 230 VAC 1~ ph 50/60Hz |
|
|
|
Optional Accessories
Art. No. | Descriptions |
PHB-02 | Microtube Block for 0.2ml Tubes, Ø6 x 96 hole (H16mm) |
PHB-05 | Microtube Block for 0.5ml Tubes, Ø7.7 x 63 hole (H29.5mm) |
PHB-20 | Microtube Block for 1.5/ 2.0ml Tubes, Ø11 x 48 hole (H36mm) |
PHB-15 | Conical tube Block for 15ml Tubes, Ø16 x 15 hole (H47mm) |
PHB-50 | Conical tube Block for 50ml Tubes, Ø28.7 x 8 hole (H47mm) |
PHB-1248 | Standard test tubes Block, Ø12 x 48 hole (H35mm) |
PHB-1330 | Standard test tubes Block, Ø13 x 30 hole (H47mm) |
PHB-1530 | Standard test tubes Block, Ø15 x 30 hole (H47mm) |
PHB-1624 | Standard test tubes Block, Ø16.5 x 24 hole (H47mm) |
PHB-1824 | Standard test tubes Block, Ø18 x 24 hole (H47mm) |
PHB-100 | Block Extraction Knob |
게시물이 없습니다
게시물이 없습니다